Argox PA-60 User Manual download pdf (Page 32)

Z Sets Print Direction

ZN/ZS Disables/Enables Flash Memory

Syntax Zp

↵ Syntax ZN↵

ZS↵

Description This command is used to set the print direction for all

Description This command is used to disable/enable the flash memory. Every time

when the printer is turned on, the flash memory is disabled. To enable

the flash memory, first install the flash memory board, then send the ZS

command.

graphics, texts, bar codes, lines and boxes.

Parameters p

: Direction. Acceptable values are B or T. The graphics, images or

texts etc. that are sent from the top are diagonally symmetrical with

those sent from the bottom. The default value is T.

All PCX graphics, soft fonts and forms can be stored to

Example N↵

RAM or flash memory. But the objects that are stored in RAM will be

cleared after the printer is turned off.

ZT↵

A50,30,0,4,1,1,R,"ZT"↵

Example ZS↵

P1↵

FK"TEST3"↵

FS"TEST3"↵

A100,100,0,4,1,1,N,”Test Flash”↵

FE↵

If the flash memory is installed and you send the example

file, then restart the printer and retrieve the form. The printer

will print out the correct result.

FR"TEST3"↵

P1↵

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 40 41

No comments

Argox PA-60 User Manual Page 32