Argox PA-60 User Manual download pdf (Page 2)

B3. FONTS

String

This printer language uses data string under the following conditions.

This printer language defines three types of fonts according to their stored media.

Name for graphics, soft fonts and forms

Data for fonts and barcodes  Internal Fonts

Prompt An ASCII text that can be transmitted to the KDU  Soft Fonts

(Keyboard Device Unit) or LCD display for X series.  Cartridge Fonts

Internal Fonts

The data string is led and ended by the character (“). The back slash character (\)

designates that the character following is a literal and will encode into the data field.

Refer to the following examples:

Five internal fonts are resident in the printer’s ROM and each of them has a unique ID

number. Different from the soft fonts, these fonts cannot be deleted.

To print Enter into Data Field

ID number Font Size Remark

1 20 pitches, 6 points.

2 17 pitches, 7 points.

3 14.5 pitches, 10 points.

4 13 pitches, 12 points.

5 5.6 pitches, 24 points. Upper case characters only

“ \“

\ \\

Notes:

1. The printer ignores <CR> and ctrl-Z (1AH) control codes. Many non

-document editors on PC based system send CR and LF when the enter key is

pressed. The carriage return (CR) code cannot be used in place of LF.

Soft Fonts

2. All commands and alpha character command, parameters are case sensitive.

The soft fonts can be downloaded from the host by means of some utility or application

software. Once the internal fonts cannot fulfill your requirements, soft fonts may be good

solutions.

1 2 3 4 5 6 7 ... 40 41

No comments

Argox PA-60 User Manual Page 2