Argox AS-9500 User Manual download pdf (Page 52)

Print Contrast

Print Contrast is used to adjust the way the imager reads Matrix

symbols. If an imager will be seeing consistently heavily printed

matrix symbols, then a Print Contrast of 6 may improve the

reading performance. For consistently light printing, a Print

Contrast of 2 may help. After scanning the Set Print Contrast bar

code, set the Print Contrast (from 1-7) by scanning digits from the

inside back cover, then scanning Save. Default = 4.

Print Contrast

Set Print Contrast

*Default

Video Reverse

Video Reverse is used to allow the imager to read bar codes that

are inverted. The “Off” bar code below is an example of this type

of bar code. If additional menuing is required, Video Reverse must

be disabled to read the menu bar codes and then re-enabled after

menuing is completed.

Note: Images downloaded from the unit will not be reversed. This

is a setting for decoding only.

Video Reverse

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 158 159

No comments

Argox AS-9500 User Manual Page 52