Argox AS-9500 User Manual download pdf (Page 29)

System Control

Scan

Scanning output:

You can set the image size to a VGA resolution to accommodate

older applications that require a smaller image size. When Image

VGA is set to On, the resultant image is 640x480 pixels. When

Image VGA is Off, the image is 752x480 pixels.

Scanning mode:

Manual/Serial Trigger Mode

When in manual trigger mode, the imager scans until a bar code is

read, or until the hardware trigger is released.

When in serial mode, the imager scans until a bar code has been

read or until the deactivate command is sent. In serial mode, the

imager can also be set to turn itself off after a specified time has

elapsed (see Read Time-Out, which follows).

Manual Trigger, Low Power (For RS-232 only)

The imager powers down until the trigger is pulled. When the

trigger is pulled, the imager powers up and operates until there is

no triggering for the time set with the Low Power Time-Out bar

code below. There is a delay of up to one second in operation

when the imager is first triggered, but there is no delay when

operating in low power time-out mode.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 158 159

No comments

Argox AS-9500 User Manual Page 29