Argox X-2300E User's Guide download pdf (Page 28)

Ethernet Printer Technical Manual November 10, 2010

7. LCD Ethernet Setting

LCD Function

Display

Function Options Description

1 DHCP DISABLE If printer is not connected to a router, with

DHCP disabled, settings of IP ADDRESS,

SUBNET MASK, and DEFAULT

GATEWAY settings will be available on

LCD.

If DISABLE is changed to be ENABLE,

LCD will prompt “ETHERNET CARD

UPDATE FINISH…”

Then please reboot the printer.

ENABLE

If printer has been connected to a router,

IP address will be assigned automatically

by DHCP server after power on.

If ENABLE is changed to be DISABLE,

and then again set back as ENABLE, LCD

will prompt “ETHERNET CARD UPDATE

FINISH…”

Then please reboot the printer.

2 IP ADDRESS xxx.xxx.xxx.xxx xxx range:0~255

When DHCP is disabled, default IP

address is 192.168.1.100.

If “_” sign appears, it means that the DHCP

setting is disabled. If not, DHCP setting is

enabled.

1. FEED/CONFIG. : change contents.

(i.e. from 000.000.000.000 to

255.255.255.255)

2. PAUSE/CALIBR. : shift “_”sign position.

(i.e. from 255.255.255.255 to

255.255.255.255)

3. CANCEL/RESET.: view next function

option. (“_” sign must be on the third

word, for example, xxx

4. To change IP ADDRESS or

3 SUBNET MASK xxx.xxx.xxx.xxx

4 DEFAULT

GATEWAY

xxx.xxx.xxx.xxx

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 50 51

Comments to this Manuals

No comments

Argox X-2300E User's Guide Page 28

Comments to this Manuals

Related products and manuals for Label printers Argox X-2300E