Argox AS-8150 Instruction Manual download pdf (Page 35)

Scan

Global min./max. code length: These are to define the min/

max readable code length of all symbologies. Code length

less than min. code length or more than max. code length will

not be read. In popular, you can set the same value for both

min. and max. reading length to force the fixed length

barcode decoded. The values of setting have no effect on

certain symbologies with fixed length. You can specify the

settings for individual barcode by the min/max code length

setting of each barcode.

Notes 1): Please set the min/max length if you have special

demand for individual barcode.

2): Include the Check sum digits if you want to set

Global min/max code length.

Inverted image scan: Set Enabled the scanner will scan

both black/white barcode with white/black background.

CTS trigger: This operation enabled an external device to

control scanning. The CTS trigger is controlled by apply an

external trigger signal to the CTS input. When active, this

signal causes scanning to begin as the scanner’s trigger was

depressed.

Power saving mode: When it is enabled, scanner will enter

idle status if not used. The illumination of the red beam will

be reduced to optimize power consumption but will recover

when scan required. Normally, the power saving mode is

activated with continuous mode.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 122 123

No comments

Argox AS-8150 Instruction Manual Page 35