Argox X-2000V User Manual download pdf (Page 34)

Caring for Your Printer

Clean the following components of the printer using a cotton bud

dampened with alcohol. Do not soak the cotton bud excessively.

Note: Always switch off the power before cleaning.

Cleaning the Print Head

Clean the print head as follows

1. Turn off the printer.

2. Open the top cover to access the print head module

3. Remove the ribbon.

4. Rub the print head with a cotton bud moistened with alcohol.

5. Check for any traces of black coloring or adhesive on the

cotton after cleaning.

6. Repeat if necessary until the cotton is clean after it is

passed over the head.

Note: Clean the print head every time the ribbon is replaced or

more often depending on actual usage and conditions.

Cleaning the Roller

Using a cotton bud moistened with alcohol, clean the roll and

remove any attached glue.

Note: Clean the roller after it has been in contact with foreign

materials such as dust or adhesives.

Cleaning the Media Compartment

Clean the media compartment with a cotton bud that has been

moistened with a mild detergent. Every time a media roll is printed,

you should clean this compartment to reduce the incidence dust.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

No comments

Argox X-2000V User Manual Page 34