Argox AS-9500 Quick Installation Guide User Manual download pdf

AS-9500 2D Area-Imaging Scanner Quick Installation Guide

49-95002-001

Interface Setting

Restore to Default Setting Turn on All Symbologies

The green aiming beam should be centered over the bar code, but it can be positioned in

any direction for a good read.

Programming Barcodes

Scanning Mode

● Image: VGA is On, the image is 640x480 pixels. VGA is Off, the image is 752x480 pixels.

● Manual Trigger: The Imager scans until a bar code is read, or until the trigger is released.

● Presentation: The LEDs are either off or at the lowest power for ambient conditions until a bar code

is presented to the imager.

Centering

Scan Centering On, the imager only reads codes that intersect the centering window and specify

the area by the Top, Bottom, Left, or Right barcodes

This QIG provides demonstration, installation and programming barcode for AS-9500 2D Area-

Imaging Scanner. Product safety information is also included.

Get Connected

AS-9500 2D Area-Imaging scanner can connect to a PC for operation.

1. Power off the PC.

2. Connect the proper interface cable to AS-9500 and to the matching port on the computer.

RS-232:

i. Connect the serial interface cable to the AS-9500 and to the serial port on the computer.

ii. Connect the power supply to the serial interface cable then plug in the power socket.

USB-HID & USB-Virtual COM :

Connect the USB interface cable to the AS-9500 and to USB port on the computer.

3. Power on the PC.

4. Configure the proper interface for AS-9500 by scanning the interface barcode below:

(Intsall the driver from CD-ROM if USB Virtual COM interface is configured.)

Linear bar code 2D Matrix symbol

CenteringScanning Mode

This device complies with the requirement of FCC Part 15 Rules. Operation shall be subject to the

following two conditions: 1) This device maynot cause harmful interface, and 2) this device must accept

that may cause undesirable operation.

This product conforms to the following standards

EMC: EN55022:2006+A1:2007,class B / EN55024:1998+A1:2001+A2:2003

This device is compliant with the requirements of the European Union Restriction on the use of Hazardous

Substances (RoHS) Directive, 2002/95/EC.

This device is compliant with requirement of BSMI and granted ID No. R3A078

*USB Virtual COM

RS-232 Interface

USB HID (PC)

USB HID (MAC)

Default Setting All Symbologies On

*VGA On

*Manual Trigger

Manual Trigger, Low Power

VGA Off

Centering On

Top of Centering Window

Left of Centering Window

*Centering Off

Bottom of Centering Window

Right of Centering Window

Presentation Mode

Safety Information

49-95002-001 1

Summary of Contents

Page 1 - 49-95002-001

AS-9500 2D Area-Imaging Scanner Quick Installation Guide49-95002-001Interface SettingRestore to Default Setting Turn on All SymbologiesThe green a

Comments to this Manuals

No comments

Argox AS-9500 Quick Installation Guide User Manual

Browse online or download User Manual for Scanners Argox AS-9500 Quick Installation Guide. Argox AS-9500 Quick Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Scanners Argox AS-9500 Quick Installation Guide